QSS Single Skin Tanks are designed for the storage of heating fuels in domestic installations.

 

However, if the tank is to be sited within;

- 50 metres of a well, borehole or spring

- 10 metres of controlled water e.g. open drain, manhole cover, river, stream or lake.

- where the tanks vent is not visible from its fill point

- where the capacity exceeds 2500 litres

    Or when any potential spillage could run over ground into controlled waters then the tank must be bunded

 

QSS Single Skin Oil Tank

Tank Specifications

 

 

 

 

 

 

 

Tank Footprint

1060mm (3’6”) x 1780mm (5’11”)

Model Number: LP1230

This is a picture of a QSS LP1230 oil tank

Westcountry Tank Replacements

Home | QSS Single Skin Tanks | QSS Bunded Tanks | QSS Fuel Banks | Harlequin Bunded Tanks

Related Links | Previous Jobs | Frequently Asked Questions | Risk Assessment Form | Contact Us

Whilst every effort has been made to ensure the accuracy of information contained within this website the owner cannot accept responsibility for expense or loss caused by any error or omission.

All pictures are Copyright © Q.S.S. Tanks unless otherwise stated.

Please notify the webmaster of any errors found at Webmaster@westcountrytankreplacements.co.uk

Westcountry Tank Replacements

25 Winchester Avenue

Torquay

Devon

TQ2 8AR

Contact Us:

Company Registration

Number C9327

http://www.westcountrytankreplacements.co.uk

Website developed by Kelvin Stapleton

Website © Wescountry Tank Replacements all rights reserved 2008  - 2012

Site last updated: Monday  12th December 2011

 

Phone: 01803 312685

 

Email: enquiries@westcountrytankreplacements.co.uk